Propane
Also known as:
C3
Propane is the lightest liquid stream produced in a refinery. The propane molecule has three carbon atoms and 8 hydrogen atoms.
In refining, propane is typically blended into finished products (LPG and propane for petrochemical feed (to make ethylene or propylene). It is also sometimes used as refinery fuel but this is typically its lowest value end use.
Propane production
Propane comes from many different process units in the refinery, as well as from outside sources such as natural gas plants (from separating NGLs).
Major sources inside the refinery include:
Atmospheric distillation - All crude oil yield some amount of propane when distilled. Typically it leaves the distillation tower in a wet gas stream that is sent to the saturated gas plant for separation from lighter gases (methane and ethane) that are then used for fuel.
FCC - In the FCC conversion process, large amounts of C3s are produced, including both saturated propane and unsaturated propylene. Often the unsaturated olefins are separated for use as feed to the alkylation unit.
Coker - Similar to the FCC, the coker conversion process generates mixed C3s containing saturated and unsaturated molecules. However, it is less common for coker C3s to have their olefins separated out.
Reformer - Reformers will yield approximately 5% (by volume) of C3s in the conversion process.